2 Mesh To 400 Mesh Inconel Wire Mesh Grade 600 601 625 718 With Excellent Fatigue And Creep Resistance
Inconel Woven Wire Mesh Introduction:
Inconel wire mesh is the premium solution for applications where standard alloys fail. Its unique combination of heat resistance, strength, and corrosion protection justifies the higher cost in:
✔ Extreme temperature environments
✔ Highly corrosive chemical processes
✔ Mission-critical aerospace components
✔ Long-term installations requiring minimal maintenance
Selection Tip: For most applications, Inconel 600 provides the best balance of performance and cost. Upgrade to 625 for severe corrosion or 718 for maximum strength in critical components.
For non-extreme environments, consider Monel or stainless steel for better cost efficiency.
Inconel wire mesh is woven from nickel-chromium superalloys, primarily:
Inconel 600 (72% Ni, 14-17% Cr, 6-10% Fe) – Standard grade
Inconel 601 (58-63% Ni, 21-25% Cr) – Improved oxidation resistance
Inconel 625 (58% Ni, 20-23% Cr, 8-10% Mo) – Superior corrosion/creep resistance
Inconel 718 (50-55% Ni, 17-21% Cr) – Age-hardenable for extreme strength
Weave Pattern: plain weave, twill weave.
Feature:
Extreme Temperature Resistance
Maintains strength from cryogenic (-423°F/-253°C) to 2200°F (1200°C)
Forms protective chromium oxide layer at high heat
✔ Unmatched Corrosion Resistance
Resists oxidizing acids, chlorides, seawater, and steam
Performs in sulfuric, hydrochloric, and phosphoric acid environments
✔ Mechanical Performance
High tensile strength (up to 220 ksi for Inconel 718)
Excellent fatigue and creep resistance
✔ Special Characteristics
Non-magnetic
Low thermal expansion
Oxidation resistant in continuous service
Applications:
Aerospace & Jet Engines
Turbine blade containment screens
Afterburner components
Exhaust system shielding
Oil & Gas (Extreme Environments)
Downhole well screens
Flare gas filters
Offshore platform components
Chemical Processing
Reactor mesh filters
Catalyst support grids
Acid-resistant gaskets
Nuclear & Power Generation
Reactor core components
Heat exchanger screens
Steam generator parts
Automotive Racing
Turbocharger mesh
Exhaust heat shields
High-performance filters
Commonen Specifications:
| Mesh (Wires/ Inch) | Wire Diameter (Inch) | Width of Opening (Inch) | Open Area (%) |
| 4 × 4 | 0.12 | 0.13 | 27 |
| 4 × 4 | 0.08 | 0.17 | 46.2 |
| 4 × 4 | 0.063 | 0.187 | 56 |
| 5 × 5 | 0.04 | 0.16 | 64 |
| 6 × 6 | 0.041 | 0.0126 | 57.2 |
| 8 ×8 | 0.047 | 0.078 | 38.9 |
| 8 × 8 | 0.041 | 0.084 | 45.2 |
| 8 × 8 | 0.03 | 0.095 | 57.8 |
| 8 × 8 | 0.028 | 0.097 | 60.2 |
| 10 × 10 | 0.0225 | 0.075 | 56.3 |
| 10 × 10 | 0.015 | 0.085 | 72.3 |
| 12 × 12 | 0.041 | 0.042 | 25.4 |
| 12 × 12 | 0.025 | 0.058 | 48.4 |
| 16 × 16 | 0.036 | 0.0275 | 19.4 |
| 16 × 16 | 0.028 | 0.035 | 30.5 |
| 16 × 16 | 0.025 | 0.038 | 36 |
| 16 × 16 | 0.023 | 0.04 | 39.9 |
| 16 × 16 | 0.018 | 0.045 | 50.7 |
| 18 × 18 | 0.028 | 0.028 | 24.7 |
| 20 × 20 | 0.016 | 0.034 | 46.2 |
| 22 × 22 | 0.015 | 0.031 | 45 |
| 24 × 24 | 0.014 | 0.028 | 44.2 |
| 24 × 24 | 0.012 | 0.03 | 50.8 |
| 28 × 28 | 0.013 | 0.023 | 40.4 |
| 30 × 30 | 0.015 | 0.018 | 30.1 |
| 30 × 30 | 0.01 | 0.0233 | 48.9 |
| 35 × 35 | 0.0055 | 0.0236 | 68.1 |
| 40 × 40 | 0.01 | 0.015 | 36 |
| 50 × 50 | 0.009 | 0.011 | 30.2 |
| 60 × 60 | 0.0075 | 0.0092 | 30.5 |
| 80 × 80 | 0.0055 | 0.007 | 31.4 |
| 100 × 100 | 0.004 | 0.006 | 36 |
| 100 × 100 | 0.0045 | 0.0055 | 30.2 |
| 120 × 120 | 0.0038 | 0.0046 | 30.7 |
| 120 × 120 | 0.002 | 0.0063 | 57.8 |
| 200 × 200 | 0.0021 | 0.0029 | 33.6 |
| 200 × 200 | 0.002 | 0.003 | 36 |
| Mesh (Wires/ Inch) | Wire Diameter (Inch) | Width of Opening (Inch) | Open Area (%) |
| 2 × 2 | 0.072 | 0.428 | 73.3 |
| 5 × 5 | 0.041 | 0.159 | 63.2 |
| 6 × 6 | 0.047 | 0.12 | 51.8 |
| 10 × 10 | 0.047 | 0.053 | 28.1 |
| 10 × 10 | 0.0225 | 0.075 | 56.3 |
| 10 × 10 | 0.015 | 0.085 | 72.3 |
| 12 × 12 | 0.025 | 0.058 | 48.4 |
| 18 × 18 | 0.017 | 0.039 | 48.3 |
| 24 × 24 | 0.014 | 0.028 | 44.2 |
| 30 × 30 | 0.017 | 0.0163 | 23.9 |
| 30 × 30 | 0.016 | 0.017 | 26.9 |
| 30 × 30 | 0.015 | 0.018 | 30.1 |
| 35 × 35 | 0.01 | 0.019 | 42.4 |
| 35 × 35 | 0.014 | 0.015 | 26.1 |
| 40 × 40 | 0.01 | 0.015 | 36 |
| Mesh (Wires/ Inch) | Wire Diameter (Inch) | Width of Opening (Inch) | Open Area (%) |
| 4 × 4 | 0.047 | 0.203 | 65.9 |
| 6 × 6 | 0.041 | 0.0126 | 57.2 |
| 8 ×8 | 0.035 | 0.09 | 51.8 |
| 8 × 8 | 0.032 | 0.093 | 55.4 |
| 8 × 8 | 0.024 | 0.101 | 65.29 |
| 20 × 20 | 0.0115 | 0.039 | 60.8 |
| 26 × 26 | 0.013 | 0.026 | 44 |
| 30 × 30 | 0.012 | 0.021 | 40.8 |
| 32 × 32 | 0.014 | 0.017 | 30.6 |
| 32 × 32 | 0.013 | 0.018 | 34.3 |
| 32 × 32 | 0.01 | 0.021 | 46.5 |
| 35 × 35 | 0.014 | 0.015 | 26.1 |
| 35 × 35 | 0.0135 | 0.015 | 27.9 |
| 35 × 35 | 0.01 | 0.019 | 42.4 |
| 40 × 40 | 0.0105 | 0.0145 | 33.65 |
| 40 × 40 | 0.0085 | 0.017 | 43.6 |
| 50 × 50 | 0.009 | 0.011 | 30.3 |
| 60 × 60 | 0.0075 | 0.009 | 30.5 |
| 100 × 100 | 0.004 | 0.006 | 36 |
| 100 × 100 | 0.0045 | 0.006 | 30.3 |
| 100 × 100 | 0.004 | 0.006 | 36 |
| Mesh (Wires/ Inch) | Wire Diameter (Inch) | Width of Opening (Inch) | Open Area (%) |
| 10 × 10 | 0.02 | 0.08 | 64 |
| 26 × 26 | 0.013 | 0.026 | 44 |
| 30 × 30 | 0.008 | 0.025 | 57.6 |
| 45 × 45 | 0.003 | 0.0192 | 74.8 |
| Mesh (Wires/ Inch) | Wire Diameter (Inch) | Width of Opening (Inch) | Open Area (%) |
| 80 × 80 | 0.0055 | 0.007 | 31.4 |
Customed as your requests.
Packing:
1. waterproof paper inside, plastic bags then load in woodencase.
2. warweproof paper inside plastic bags then load in pallet.
3. as customers' requirement.
Product Tags:
|
|
2 Mesh To 400 Mesh Inconel Wire Mesh Grade 600 601 625 718 With Excellent Fatigue And Creep Resistance Images
|
